Choose a process to review its engineering scope, typical applications, workflow, and the information that helps us prepare an accurate project response.
01
Engineering
Product Design & DFM
Turn an early concept or existing CAD model into a released design that can be quoted, tooled, inspected, and produced. Product intent is connected to material behavior, assembly, tolerance strategy, process capability, and cost.
Core capabilities
3D CAD development, product refinement, and assembly review
Material, nominal wall thickness, draft, radii, tolerances, and datum review
Process-specific DFM before tooling or manufacturing release
Injection molds are engineered for reliable trials, repeatable molding, safe part release, and maintainability. Mold design, machining, fitting, assembly, tryout, and correction stay under one project plan.
Move from approved mold trials into repeat production with the same team that understands the part and tool. Material preparation, machine setup, process settings, inspection requirements, and engineering changes stay connected.
Core capabilities
Material preparation and machine setup for the approved resin
Mold trials, process-window development, and controlled repeat runs
First-off, in-process, dimensional, cosmetic, and functional checks as specified
Stamped parts and dies are developed around material grade and thickness, strip layout, forming sequence, springback, press requirements, feature repeatability, and production volume.
Core capabilities
Blanking, piercing, bending, flanging, coining, drawing, and forming review
Single-operation, compound, or progressive die planning according to part and volume
Die tryout, first-off inspection, deburring, and repeat production
Machine prototypes, tooling, and production parts using the axis strategy, setups, workholding, and inspection plan that best fit the geometry, datum structure, material, quantity, and finish requirements.
Core capabilities
3-, 4-, and 5-axis machining routes selected to suit part geometry
Material and cutting strategy reviewed against the released specification
CAM programming, workholding, first-article inspection, deburring, and finishing coordination
Develop aluminum high-pressure die cast components through part DFM, die and trim-tool engineering, casting trials, trimming, secondary machining, finishing, and dimensional verification.
Core capabilities
Alloy, wall thickness, draft, radii, parting line, and tolerance review
Runner, gate, overflow, venting, thermal-control, and trim-tool planning
Casting, trimming, deburring, secondary machining, finishing, and inspection coordination
